How to Apply EternaGreen TM BioChar
Thursday July 23, 2009 @ 11:07 am
Provided by EternaGreen.com. Application rates
vary according to soil type and type of plant. The prospective figures
are delivered from University testing at various collegiate bodies
worldwide.
Turfgrass Establishment: Add 1lb. EternaGreen™ per 10 sq. ft. and work into 4-6 inches of existing soil. Add seed, rake and water thoroughly.Maintenance: Following aeration, dethatching, scarification, apply 1lb. per 10 sq. ft or premix with sand or soil at a rate of 1.25 gallons EternaGreen per cu. ft. of growing media.
Vegetable Gardens: Incorporate 1 lbs. EternaGreen™ per 10 sq. ft. and work into 4-6 inches of existing soil. Add seed, rake and water thoroughly.
Trees and Shrubs: Mix 1.25 gallons EternaGreen™ per cu. ft. of soil (approximately 5 gallons) from the planting hole. Place 6 inches of this mixture into the hole. Place tree or shrub into planting hole and fill with remainder of mix.
Flower Beds: Incorporate 1lb. EternaGreen™ per 10 sq. ft. of the planting bed.
Potted Plants: When repotting plants, mix 1.25 gallons of EternaGreen™ per cu. ft. (5 gallons) of growing media.
Vegetables and Flower Transplant: Add 1/2 inch layer EternaGreen™ to bottom of transplant hole.
Farms: Use 1 ton of EternaGreen™ BioChar for every 5 acres.
Comments
Be the first to post a comment using the form below.